Figure 76 diffserv: dscp setting, Table 49 diffserv: dscp setting – ZyXEL Communications ZyXEL Dimension ES-2108 User Manual
Page 144
Advertising
ES-2108 Series User’s Guide
144
Chapter 21 Differentiated Services
Figure 76 DiffServ: DSCP Setting
The following table describes the labels in this screen.
Table 49 DiffServ: DSCP Setting
LABEL
DESCRIPTION
0 … 63
This is the DSCP classification identification number.
To set the IEEE802.1p priority mapping, select the priority level from the drop-down list box.
Apply
Click Apply to save your changes to the switch’s run-time memory. The switch loses these
changes if it is turned off or loses power, so use the Save link on the top navigation panel to
save your changes to the non-volatile memory when you are done configuring.
Cancel
Click Cancel to discard all changes and start configuring the screen again.
Advertising