ZyXEL Communications ZyXEL Dimension ES-2108 - Manual (Page 193)

ES-2108 Series User’s Guide
Chapter 30 Introducing Commands 193
bandwidth-
control
Displays bandwidth control
settings on the port(s).
13
egress Displays outgoing port information
on the port(s).
13
bstorm-control Displays broadcast storm control
settings on the port(s).
13
igmp-immediate-
leave
Displays IGMP immediate leave
settings on the port(s).
13
igmp-filtering Displays IGMP filter profile
settings on the port(s).
13
igmp-group-
limited
Displays IGMP group settings on
the port(s).
13
igmp-query-mode Displays IGMP query mode
settings on the port(s).
13
vlan Displays the status of all VLANs. 13
<vlan-id> Displays the status of the
specified VLAN.
13
running-config Displays current operating
configuration.
13
help Displays detailed information and
parameters for this command.
13
interface port-
channel <port-
list>
[bandwidth-
limit...]
Displays current operating
configuration on a port by port
basis. Optionally specifies which
settings are displayed.
13
timesync Displays time server information. 13
time Displays current system time and
date.
13
garp Displays GARP information. 13
loginPrecedence Displays login precedence
settings.
13
logging Displays system logs. 13
ssh Displays general SSH settings. 13
known-hosts Displays known SSH hosts
information.
13
key
<rsa1|rsa|dsa>
Displays internal SSH public and
private key information.
13
session Displays current SSH session(s). 13
https Displays the HTTPS information. 13
session Displays current HTTPS
session(s).
13
certificate Displays the HTTPS certificates. 13
key <rsa|dsa> Displays the HTTPS key. 13
Table 73 Command Summary: Enable Mode (continued)
COMMAND DESCRIPTION LEVEL