ZyXEL Communications ZyXEL Dimension ES-2108 - Manual (Page 61)

ES-2108 Series User’s Guide
Chapter 5 Initial Setup Example 61
In the example network, configure 2 as the port VID on port 5 so that any untagged frames
received on that port get sent to VLAN 2.
Figure 24 Initial Setup Network Example: Port VID
1 Click Advanced
Applications and
VLAN in the
navigation panel.
Then click the VLAN
Port Setting link.
2 Enter 2 in the PVID
field for port 5 and
click Apply to save
your changes back to
the run-time memory.
Settings in the run-
time memory are lost
when the switch’s
power is turned off.
5.1.3 Configuring Switch Management IP Address
The default management IP address of the switch is 192.168.1.1. You can configure another IP
address in a different subnet for management purposes. The following figure shows an
example.