ZyXEL Communications ZyXEL Dimension ES-2108 User Manual
Page 208
ES-2108 Series User’s Guide
208
Chapter 30 Introducing Commands
speed-duplex <auto|10-
half|10-
full|100-
half|100-
full|1000-
full>
Sets the duplex mode (
half
or
full
)
and speed (
10
,
100
or
1000
Mbps) of
the connection on the interface. Selecting
auto
(auto-negotiation) makes one port
able to negotiate with a peer
automatically to obtain the connection
speed and duplex mode that both ends
support.
13
no egress
set
<port-list>
Disables the outgoing traffic port list for a
port-based VLAN.
13
igmp-
immediate-
leave
Disables IGMP immediate leave on the
port.
13
igmp-
filtering
profile
Disables IGMP filtering on the port.
13
igmp-group-
limited
Disables IGMP group limitation.
13
gvrp
Disable GVRP on the port(s).
13
flow-control
Disables flow control on the port(s).
13
vlan-trunking
Disables VLAN trunking on the port(s).
13
mirror
Disables port mirroring on the port(s).
13
diffserv
Disables DiffServ on the switch.
13
bandwidth-
limit
Disables bandwidth limit on the port(s).
13
bmstorm-limit
Disables broadcast storm limits on the
switch.
13
inactive
Enables the port(s) on the switch.
13
intrusion-
lock
Disables intrusion-lock on a port so that a
port can be connected again after you
disconnected the cable.
13
inactive
Disables the specified port(s) on the
switch.
13
help
Displays a description of the interface
port-channel commands.
13
exit
Exits from the interface port-channel
command mode.
13
intrusion-lock
Enables intrusion lock on a port and a
port cannot be connected again after you
disconnected the cable.
13
test
Performs an interface loopback test.
13
Table 75 interface port-channel Commands (continued)
COMMAND
DESCRIPTION
PRIVILEGE