ZyXEL Communications ZyXEL Dimension ES-2108 User Manual
Page 199
ES-2108 Series User’s Guide
Chapter 30 Introducing Commands
199
ssh
key
<rsa1|rsa|dsa>
Disables the secure shell
server encryption key. Your
switch supports SSH versions
1 and 2 using RSA and DSA
authentication.
13
known-hosts
Removes all remote hosts.
13
known-hosts
<host-ip>
Removes the specified remote
host from the list of all known
hosts.
13
known-hosts
<host-ip>
[1024|ssh-
rsa|ssh-dsa]
Removes remote known hosts
with the specified public key
(1024-bit RSA1, RSA or DSA).
13
https timeout
Resets the session timeout to
the default of 300 seconds.
13
multi-login
Disables another administrator
from logging into Telnet.
14
cluster
Disables cluster management
on the switch.
13
cluster member
<mac-address>
Removes the cluster member. 13
mvr <vlan-id>
Disables MVR on the switch.
13
syslog
Disables syslog logging.
13
server <ip-
address>
Disables syslog logging to the
specified syslog server.
13
server <ip-
address>
inactive
Enables syslog logging to the
specified syslog server.
13
type [type]
DIsables syslog logging for the
specified log type (
sys
,
link
,
config
,
error
or
report
).
13
pwr interface
<port-list>
Disable PoE on the specified
ports. (ES-2108PWR only)
13
pwr mibtrap
Disables mibtraps. (ES-
2108PWR only)
13
vlan
<1-4094>
Enters the VLAN configuration
for more information.
vlan-type <802.1q|port-
based>
Specifies the VLAN type.
13
igmp-
snooping
Enables IGMP snooping.
13
8021p-priority
<0-7>
Sets the IEEE 802.1p priority
values for IGMP control traffic.
13
host-timeout
<1-16711450>
Sets the host timeout value.
13
Table 74 Command Summary: Configuration Mode (continued)
COMMAND
DESCRIPTION
PRIVILEG
E