ZyXEL Communications ZyXEL Dimension ES-2108 - Manual (Page 209)

ES-2108 Series User’s Guide
Chapter 30 Introducing Commands 209
30.11.5 config-vlan Commands
The following table lists the vlan commands in configuration mode.
Table 76 Command Summary: config-vlan Commands
COMMAND DESCRIPTION PRIVILEGE
vlan <1-
4094>
Creates a new VLAN group. 13
name <name-
str>
Specifies a name for identification
purposes.
13
normal <port-
list>
Specifies the port(s) to dynamically join
this VLAN group using GVRP
13
fixed <port-
list>
Specifies the port(s) to be a permanent
member of this VLAN group.
13
forbidden
<port-list>
Specifies the port(s) you want to prohibit
from joining this VLAN group.
13
untagged
<port-list>
Specifies the port(s) you don’t want to tag
all outgoing frames transmitted with this
VLAN Group ID.
13
inactive Disables the specified VLAN. 13
help Displays a list of available VLAN
commands.
13
no fixed <port-
list>
Sets fixed port(s) to normal port(s). 13
forbidden
<port-list>
Sets forbidden port(s) to normal port(s). 13
untagged
<port-list>
Enables VLAN tagging for outgoing traffic
on the specified port(s).
13
inactive Enables the specified VLAN. 13
ip address
default-
management
dhcp-bootp
Sets the default in-band interface to use
a static IP address in this VLAN.
The switch will use the default IP address
of 0.0.0.0 if you do not configure a static
IP address.
13
ip address
<ip-address>
<mask>
Deletes the IP address and subnet mask
from this VLAN.
13
ip address
default-
gateway
Deletes the default gateway from this
VLAN.
13
exit Leaves the VLAN configuration mode. 13
ip address default-
management
dhcp-bootp
Sets the dynamic in-band IP address 13