ZyXEL Communications ZyXEL Dimension ES-2108 User Manual
Page 200
ES-2108 Series User’s Guide
200
Chapter 30 Introducing Commands
leave-timeout
<1-16711450>
Sets the leave timeout value
13
unknown-
multicast-frame
<drop|flooding>
Sets how to treat traffic from
unknown multicast group.
13
igmp-
filtering
Enables IGMP filtering on the
switch.
13
profile <name>
start-address
<ip> end-address
<ip>
Sets the range of multicast
address(es) in a profile.
13
interface
port-channel
<port-list>
Enables a port or a list of ports
for configuration. See
details.
13
spq
Sets the queuing method to
SPQ (Strictly Priority
Queuing).
13
wrr
Sets the queuing method to
WRR (Weighted Round
Robin).
13
<wt1> <wt2> <wt3>
<wt4>
Sets the weight value from 1 to
8 to each variable. These
values are used in WRR
queuing.
13
ip
route
<ip> <mask>
<next-hop-ip>
Creates a static route.
13
<ip> <mask>
<next-hop-ip>
[metric
<metric>] [name
<name>]
[inactive]
Sets the metric of a static route
or deactivates a static route.
13
name-server
<ip>
Sets the IP address of a
domain name server.
13
address default-
gateway
<ip>
Sets the default gateway's IP
address for the out-of-band
management port.
13
address
<ip> <mask>
Sets the IP address and
subnet mask of the out-of-
band management port.
13
mac-forward name <name> mac
<mac-addr> vlan
<vlan-id>
interface
<interface-id>
Configures a static MAC
address forwarding rule.
13
inactive
Disables a static MAC address
forwarding rule.
13
Table 74 Command Summary: Configuration Mode (continued)
COMMAND
DESCRIPTION
PRIVILEG
E