ZyXEL Communications ZyXEL AG-220 - Manual (Page 24)

ZyXEL AG-220 User’s Guide
24 Chapter 1 Getting Started
1.2.1.1 Infrastructure
To connect to a network via an access point (AP), set the AG-220 network type to
Infrastructure. Through the AP, you can access the Internet or the wired network behind the
AP.
Figure 1 Application: Infrastructure
1.2.1.2 Ad-Hoc
To set up a small independent wireless workgroup without an AP, use Ad-Hoc.
Ad-Hoc does not require an AP or a wired network. Two or more wireless clients
communicate directly with each other.