ZyXEL Communications ZyXEL AG-220 - Manual (Page 68)

ZyXEL AG-220 User’s Guide
68 Chapter 4 Wireless Station Mode Configuration
4.7 The Adapter Screen (Windows Vista)
This screen is only available in the Windows Vista version of the utility. To set the other
advanced features on the AG-220, click the Adapter tab.
Figure 44 Station Mode: Adapter (Windows Vista)
Power Saving
Mode
Select Maximum Power Save or Fast Power Save to save power (especially for
notebook computers). This forces the AG-220 to go to sleep mode when it is not
transmitting data.
When you select Continuous Access Mode, the AG-220 will never go to sleep
mode.
OTIST (One-
Touch Intelligent
Security
Technology)
Select this check box to enable OTIST.
Setup Key Enter the same setup key (up to eight printable characters) as the ZyXEL AP or
wireless router to which you want to associate. The default OTIST setup key is
"01234567".
Note: If you change the OTIST setup key on the ZyXEL AP or
wireless router, you must also make the same change here.
Start Click Start to encrypt the wireless security data using the setup key and have the
ZyXEL AP or wireless router set your AG-220 to use the same wireless settings as
the ZyXEL AP or wireless router. You must also activate and start OTIST on the
ZyXEL AP or wireless router all within three minutes. See Section 3.4 on page 47
for more information.
Save Click Save to save the changes to the AG-220 and return to the Link Info screen.
Table 15 Station Mode: Adapter (continued)
LABEL DESCRIPTION