ZyXEL Communications ZyXEL AG-220 - Manual (Page 55)

ZyXEL AG-220 User’s Guide
Chapter 4 Wireless Station Mode Configuration 55
4.3.1 Security Settings
When you configure the AG-220 to connect to a network with wireless security activated and
the security settings are disabled on the AG-220, the screen varies according to the encryption
method used by the selected network.
4.3.1.1 WEP Encryption
Figure 30 Station Mode: Security Setting: WEP
The following table describes the labels in this screen.
MAC address This field displays the MAC address of the wireless device.
Surveyed at This field displays the time when the wireless device was scanned.
Table 5 Station Mode: Site Survey (continued)
LABEL DESCRIPTION
Table 6 Station Mode: Security Setting: WEP
LABEL DESCRIPTION
Security Settings
WEP Select 64 Bits, 128 Bits or 256 Bits to activate WEP encryption and then fill in the
related fields.
Encryption Type Select an authentication method. Choices are SHARED and OPEN.
Refer to
Section 3.2.3.1.2 on page 39 for more information.
Pass Phrase Enter a passphrase of up to 63 case-sensitive printable characters. As you enter
the passphrase, the AG-220 automatically generates four different WEP keys and
displays it in the key field below. Refer to Section 3.2.3.1.1 on page 39 for more
information.
At the time of writing, you cannot use the passphrase function to generate 256-bit
WEP keys.
Transmit Key Select a default WEP key to use for data encryption. The key displays in the field
below.