ZyXEL Communications ZyXEL AG-220 - Manual (Page 73)

ZyXEL AG-220 User’s Guide
Chapter 5 Access Point Mode Configuration 73
C
H A P T E R
5
Access Point Mode
Configuration
This chapter shows you how to configure your AG-220 in access point mode.
Note: Access Point Mode is not available in Windows Vista.
5.1 Access Point Mode Introduction
To set your AG-220 to access point (AP) mode, select AP Mode in any utility screen (refer to
Section 1.2.3 on page 25) .
Access point mode allows you to set up your wireless networks without using a dedicated AP.
5.1.1 ZyXEL Utility Screen Summary
This section describes the ZyXEL utility screens when the AG-220 is in AP mode.
Figure 49 ZyXEL Utility Menu Summary: AP Mode
The following table describes the menus.
Table 17 ZyXEL Utility Menu Summary: AP Mode
TAB DESCRIPTION
AP Mode
Link Info Use this screen to see your current connection status, configuration and data rate
statistics.
Configuration Use this screen to configure wireless LAN settings.
Advanced Use this screen to change the wireless network mode.
MAC Filter Use this screen to configure which computer(s) you want access to the wireless
LAN through the AG-220.