ZyXEL Communications ZyXEL AG-220 - Manual (Page 25)

ZyXEL AG-220 User’s Guide
Chapter 1 Getting Started 25
Figure 2 Application: Ad-Hoc
1.2.2 Access Point Mode
You can also set the AG-220 to access point mode. This allows you to set up your wireless
networks without using a dedicated AP. The following figure shows a network example.
Figure 3 Application: Access Point Mode
In the example, the AG-220 is installed on computer A and set to operate in access point
mode. Computer A provides an Internet connection to the wireless LAN, so wireless stations
B and C can access the Internet.
1.2.3 Changing AG-220 Mode
To change between the modes, select either Station Mode or AP Mode in any ZyXEL utility
screens.
Note: This feature is not available in the Windows Vista utility. The Windows Vista
utility only operates in Station Mode.