Figure 38 station mode: profile: wireless settings, Table 13 station mode: profile: select a channel – ZyXEL Communications ZyXEL AG-220 User Manual
Page 64
ZyXEL AG-220 User’s Guide
64
Chapter 4 Wireless Station Mode Configuration
The following table describes the labels in this screen.
3 If you selected Infrastructure network type in the first screen, select WEP, WPA,
WPA2, WPA-PSK, WPA2-PSK or 802.1x from the drop-down list box to enable data
encryption. If you selected Ad-Hoc network type in the first screen, you can only use
WEP encryption method. Otherwise, select DISABLE to allow the AG-220 to
communicate with the access points or other peer wireless computers without any data
encryption, and skip to step
5
.
Figure 38 Station Mode: Profile: Wireless Settings
4 The screen varies depending on the encryption method you select in the previous screen.
The settings must be exactly the same on the APs or other peer wireless computers as
they are on the AG-220. Refer to
wireless security configuration.
Table 13 Station Mode: Profile: Select a Channel
LABEL
DESCRIPTION
Wireless Settings
Channel
Select a channel number from the drop-down list box. To associate to an ad-hoc
network, you must use the same channel as the peer computer.