ZyXEL Communications ZyXEL AG-220 - Manual (Page 58)

ZyXEL AG-220 User’s Guide
58 Chapter 4 Wireless Station Mode Configuration
4.3.1.4 IEEE 802.1x
Configure IEEE 802.1x security with various authentication methods in this screen.
Note: At the time of writing Login Name and Password are not available on
Windows Vista.
Figure 33 Station Mode: Security Setting: 802.1x
Login Name Enter a user name.
This is the user name that you or an administrator set up on a RADIUS server.
Note: At the time of writing this field is not available on Windows
Vista.
Password This field is not available when you select TLS in the Authentication Type field.
Enter the password associated with the user name above.
Note: At the time of writing this field is not available on Windows
Vista.
Certificate This field is only available when you select TLS in the Authentication Type field.
Click Browse to select a certificate.
Note: You must first have a wired connection to a network and
obtain the certificate(s) from a certificate authority (CA).
Consult your network administrator for more information.
Validate Server
Certificate
Select the check box to check the certificate of the authentication server.
PEAP Inner EAP This field is only available when you select PEAP in the Authentication Type field.
The PEAP method used by the RADIUS server or AP for client authentication is
MS CHAP v2.
Back Click Back to go to the Site Survey screen to select and connect to another
network.
Next Click Next to confirm your selections and advance to the Confirm Save screen.
Refer to Section 4.3.2 on page 60 .
Exit Click Exit to return to the Site Survey screen without saving.
Table 8 Station Mode: Security Setting: WPA/WPA2
LABEL DESCRIPTION