Xantrex Technology GPIB-M-XT - Manual (Page 124)

Error Messages
Front Panel Error Codes
122 Operating Manual for Multichannel Functionality (GPIB-M)
Front Panel Error Codes
Table C.7 Front Panel Error Codes
CPU Error Codes
Table C.8 CPU Error Codes
Analog Programming Interface Error codes
Table C.9 Analog Programming Interface Error code
Auto Sequencing Error Codes
Table C.10Auto Sequencing Error Codes
Error
code
Error Message Description
+1301 Front Panel Protocol Error
Invalid data from the front panel was sent to the CPU
+1302 Front Panel Not Responding
+1303 Front Panel Self-Test Failed
Error
code
Error Message Description
+1401 ColdFire Self-Test Failed
Error
code
Error Message Description
+1501 Analog programming self-test failed
Error
code
Error Message Description
+1601 Invalid step number
Step does not exist, is out of allowed range or preceding steps do not exist.