Compactflash card – Zebra Technologies R170XiTM User Manual
Page 124
112
R110Xi/R170Xi User Guide
23063L-003 Rev. 2 12/23/04
Memory Cards
CompactFlash Card
CompactFlash Card
A CompactFlash card is a nonvolatile memory card that stores data even when the power to
the printer is turned off. A Type I-compliant CompactFlash card holds extra memory or
optional fonts for your printer.
To install a CompactFlash card, complete these steps:
1.
Turn the AC power Off (O).
2.
Disconnect the AC power cord from the printer.
3.
Remove the two screws near the bottom of the electronics cover (
).
Figure 41 • Printer Exterior
4.
Lift the electronics cover at the rear top corner. Pull the corner forward and up, then lift the
cover up and away from the printer.
Caution • This procedure should only be performed by qualified service technicians.
Electrostatic Discharge Caution • Observe proper electrostatic safety precautions when
handling any static-sensitive components such as circuit boards and printheads.
1
Electronics cover
2
Screws
3
Channel
4
Lip of cover
3
4
2
1