Zebra Technologies R170XiTM - Manual (Page 20)

8 R110Xi/R170Xi User Guide 23063L-003 Rev. 2 12/23/04
Printer Setup
Before You Begin
Before You Begin
Review this checklist, and resolve any issues before you begin setting up your printer. When
you are ready, continue with
Printer Operation on page 19 .
‰ Unpack and Inspect Have you unpacked the printer and inspected it for damage? If
you have not, see Unpack and Inspect the Printer on page 9 .
‰ Select a Site Have you selected an appropriate location for the printer? If you have not,
see Select a Site for the Printer on page 10 .
‰ Attach Power Cord Do you have the correct power cord for your printer? If you are
unsure, see Power Cord Specifications on page 11 . To attach the power cord and connect the
printer to a power source, see Connect the Printer to a Power Source on page 11 .
‰ Connect to a Data Source Have you determined how the printer will be connected to
a data source (usually a computer)? For more information, see Select a Communication
Interface on page 12 .
‰ Select Media Do you have the correct media for your application? If you are unsure,
see Types of Media on page 14 .
‰ Select Ribbon Do you need to use ribbon, and is the appropriate ribbon available, if
needed? If you are unsure, see Ribbon on page 16 .