Zebra 105SL - Manual (Page 42)

Operations
Load Media in Tear-Off Mode 34
11342L-001 Rev. A 105SL User Guide 6/30/06
Load Media in Tear-Off Mode
Tear-Off is the default mode. Figure 17 shows roll media loaded in Tear-Off mode.
Figure 17 • Tear-Off Mode
To load media in Tear-Off mode, complete these steps:
1. Set the printer to Tear-Off mode. See Select Print Mode on page 80 for instructions.
2. Insert media into the printer. See Insert Media into the Printer on page 31 for instructions.
3. Open the printhead assembly by rotating the printhead-open lever counterclockwise.
1
Printed label
2
Printhead-open lever
3
Outer media guide
4
Media supply hanger
5
Media supply guide
1 2 3 4 5