Z Microsystems 19 - Manual (Page 11)

Doc# 27-0023UM Rev 1.0 Issued 09/04
11
INSTALLATION
Close the storage tray top,
then place the keyboard
and mouse on top of the
tray door.
Using both hands, gently
lift the Console screen by
the top bar.
Open the storage tray top.
Remove the keyboard and
mouse.
Align the Keyboard and
Mouse cable to pass
through the recessed ac-
cess notch.
With both hands, press
both the Z-Locks down and
SETTING UP THE MONITOR KEYBOARD AND MOUSE
Slide the Console all the
way out.
The storage tray door now
becomes a workstation for
the keyboard and mouse.
There should be ample
cable to both units for
movement around the
workstation.