Z Microsystems 19 - Manual (Page 18)

Doc# 27-0023UM Rev 1.0 Issued 09/04
18
OPERATIONS
Main Screen Information
Use the Up and Down buttons to highlight the “Information” option. Press the “Menu” but-
ton to access the “Information” submenu.
Within this submenu, view
the video mode resolution,
the refresh rate, and the
sync mode. Press “Exit” to
return to the Main Menu.
Menu Timeout:
The menu timeout is the
amount of time the menu
will appear while not in use
before it times out. When
the menu times out, it
disappears from the main
screen. Select with Up and
Down keys and adjust with
the Left and Right keys.
#/.&)'52!4)/.
-ENU
2ESET
#HANNEL

+6-
Reset Default Settings:
Resets all Main Menu set-
tings to the factory default
settings. Select and press
the Menu button.
Channel Select Auto:
The Command Console has two channel options. Highlight
“Channel Select” and use the Left and Right keys to
change channels. If both channels have been configured
for use, the following options are relevant:
AUTO: Automatically selects the available channel.
CHANNEL A: Allows the operator to choose Channel A as
active.
CHANNEL B: Allows the operator to choose Channel B as
active (channel B is optional--not standard).
The Channel LEDs on the
front panel display buttons
reveal the active channels,
as well. See the section
regarding “Controls” for
more details on the channel
LEDs.
Main Screen Confi guration