Z Microsystems 19 - Manual (Page 24)

Doc# 27-0023UM Rev 1.0 Issued 09/04
24
OPERATIONS
SoftMenus™ are control panel dialog screens accessed from the host computer, allowing
fl exibility where positioning and environmental demands are a concern.
In order to access the SoftMenu™ features, the host serial port must be accessed at the
rear of the Command Console. The Command Console must be connected to the com-
puter and software must be installed.
The following initializing screen will appear as the SoftMenu™ software is launched:
Clicking on the “Exit” button will cancel the SoftMenu™ program from opening.
SOFTMENUS™