Z Microsystems 19 - Manual (Page 57)

Doc# 27-0023UM Rev 1.0 Issued 09/04
57
APPENDIX
provide for PIP# in the command structure namely “0”, “1”, “2”, and “3”, where “0” acts on
the main image and “1”, “2”, and “3” act on the RGB PIP specifi ed.
RGB PIP
The following commands are those that act on the RGB PIPs contained in the display’s
confi guration.
PBB
Description
PBB adjusts the blue balance of the picture-in-picture’s RGB setting.
Argument
The allowable range is 0-255 base10. The factory default is 128.
PBG
Description
PBG adjusts the green balance of the picture-in-picture’s RGB setting.
Argument
The allowable range is 0-255 base10. The factory default is 128.
PBR
Description
PBR adjusts the red balance of the picture-in-picture’s RGB setting.
Argument
The allowable range is 0-255 base10. The factory default is 128.
PCK
Description
PCK toggles the chroma key feature ON/OFF.
Argument
Provide a “1” for ON and a “0” for OFF.
PDS
Description
PDS has the display place all of the RGB picture-in-picture settings back to the factory
defaults.