Z Microsystems 19 - Manual (Page 2)

Doc# 27-0023UM Rev 1.0 Issued 09/04
2
REGISTRATION
WARNING
TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR
MOISTURE. ALSO, DO NOT USE THIS UNIT’S POLARIZED AS PLUG WITH AN EXTENSION
CORD RECEPTACLE OR OTHER OUTLETS UNLESS ALL THREE PRONGS CAN BE FULLY
INSERTED
CAUTION
RISK OF ELECTRIC SHOCK - DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR
BACK OF UNIT). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALI-
FIED PERSONNEL.
This symbol warns the user that insulated voltage within the unit may have suffi cient
magnitude to cause electric shock. Therefore, it is dangerous to make any kind of con-
tact with any part inside this unit.
This symbol alerts the user that important literature concerning the operation and
maintenance of this unit has been included. Therefore it should be read carefully in
order to avoid any problems.
Command
Console
19
1. Use the power and
video cables supplied
with the product to help
prevent interference
with radio and television
reception. The use of
cables and adapters may
cause interference with
electronic equipment in
the vicinity of this unit.
2. Changes or modi-
fi cations not ex-
pressly approved by Z
Microsystems could void
user’s warranty.