Z Microsystems 19 - Manual (Page 4)

Doc# 27-0023UM Rev 1.0 Issued 09/04
4
INTRODUCTION
ABOUT MANUAL
SAFETY PRECAUTIONS
DANGER:
To avoid shock hazard:
Do not remove the covers around the
Command Console
Do not connect or disconnect the
Command Console during an
electrical storm.
Th e power cord plug must be connected
to a properly wired and grounded
power outlet.
Any equipment to which the
Command Console will be attached
must also be connected to properly
wired and grounded power outlets.
•
•
•
•
This Manual is also available on the Z Microsystems website (www.zmicro.com). We
recommend you read this manual carefully and follow the instructions in the Installation
chapter for verifi cation of system functions and control settings.