3Com 2101 - Manual (Page 39)

5
S
TANDARD
F
EATURES
This chapter describes standard features of the NBX Business and Basic
Telephones. It covers these topics:
■
Answering a Call
■ Using the NBX Telephone Display Panel
■ More Ways to Dial a Call
■
Setting Your Call Coverage Point
■ Putting a Call on Hold
■ Transferring a Call
■ Establishing a Conference Call
■
Setting the Volume
For help on accessing NBX features from an analog telephone, see the
NBX Feature Codes Guide in the NBX NetSet utility. For how to set up
your NBX NetSet password the first time, see
Chapter 1 .
If your system uses a third-party messaging application, use the
documentation for your messaging application instead of the instructions
in this chapter.
CAUTION: The NBX telephone system operates over the LAN, not
through a traditional telephone connection. Your telephone is connected
to the NBX system through an RJ45 Ethernet connector instead of a
typical RJ11 telephone connection. Your telephone will not work unless it
is connected properly. For instructions on how to connect your telephone
to the LAN, see Appendix A. Exception: To connect an NBX Business or
Basic Telephone that has a model number that ends in PE, see the
packing sheet that comes with your telephone. See the underside of the
telephone for your model number. Ask your administrator if you have
questions about your telephone connection.