3Com 2101 - Manual (Page 63)

Palm Integration 63
Palm Integration (NBX 2102-IR Telephone only) — The infrared port on the front edge
of the NBX Model 2102-IR Business Telephone receives infrared signals
from a hand-held device running the Palm operating system. You can use
your hand-held device to call numbers in its directory and to perform
standard NBX Business Telephone operations, such as Forward, Redial,
and Transfer.
Install the Palm Dialer software (available on the NBX Resource Pack CD)
on your hand-held device. See your administrator for details.
Using a Headset You can use a headset that has a microphone with any NBX telephones.
These instructions are for a typical headset and amplifier. You may need
to modify some of these instructions for some types of headset or
amplifier equipment.
To use a headset for all calls:
1 Insert the cord for the headset amplifier into the handset cord's
receptacle on the underside of the telephone.
2 Insert the cord for the headset into the headset amplifier and put on the
headset.
3 Pick up the phone’s handset off the phone and lay it down on your desk.
To use either the handset or the headset for each call:
1 Insert the cord for the headset amplifier into the handset cord receptacle
on the underside of the telephone.
2 Insert both the headset cord and the handset cord into the headset
amplifier.
3 For headset calls: Lift the handset off the telephone and leave it off. Use
the headset microphone and earphones.
4 For handset calls: Press the button on the headset amplifier that turns the
headset off, pick up the handset, and speak into it.
When you use a headset, either the headset or the amplifier is plugged
into the handset cord’s receptacle on the underside of the telephone.
Although the handset may be plugged into the amplifier, you must
remove the handset from the cradle to use the headset.