3Com 3C319 - Manual (Page 27)

Before Configuring the NIC and Installing the Driver 2-7
If you encounter problems during any step of the
installation process, turn to
Chapter 9 , “Troubleshooting
NIC Installation,” for help.
Table 2-2 Installation Procedures for Supported Network Environments
Step
NetWare
DOS Client
Windows 95 Windows NT Others
1 Run AutoLink.
See Chapter 3 ,
“Installing
NetWare DOS
Clients
Automatically
.”
Install driver.
See Chapter 4 ,
“Installing a
Network Driver
for
Windows 95
.”
Boot DOS,
disable PnP, and
configure NIC.
See Chapter 5 ,
“Configuring the
NIC Manually
.”
Boot DOS, disable
PnP, and configure
NIC.
See Chapter 5 ,
“Configuring the
NIC Manually
.”
2 Configure
DynamicAccess
Class of Service.
See Chapter 7 ,
“Configuring
DynamicAccess
Class of
Service
.”
Install driver.
See Chapter 6 ,
“Installing a
Network Driver
for
Windows NT
.”
Install driver.
See Chapter 8 ,
“Manually Installing
Miscellaneous
Network Drivers
.”
3 Configure
DynamicAccess
Class of Service.
See Chapter 7 ,
“Configuring
DynamicAccess
Class of
Service
.”