3Com 3C319 - Manual (Page 56)

6-4 C HAPTER 6: I NSTALLING A N ETWORK D RIVER FOR W INDOWS NT
5 In the Select Network Adapter dialog box, click
Have Disk.
The Insert Disk dialog box appears.
6 Insert TokenDisk diskette #2 in the floppy drive.
7 Type the following path and click OK:
a:\
This path identifies the location of the NDIS 4
OEMSETUP.INF file for Windows NT 4.0.
The Select OEM Option dialog box appears.
8 Select 3Com TokenLink Velocity ISA (3C319) Adapter
and click OK.
9 Verify that 3Com TokenLink Velocity ISA (3C319)
Adapter appears in the list in the Network
Adapters tab and click Close.
If your network environment uses the TCP/IP
communications protocol, the Microsoft TCP/IP Properties
dialog box will be displayed. You must obtain from your
network administrator all the information you need to
define an IP address during the installation process.
Continue once you have defined the NIC to TCP/IP.
Bindings messages appear, followed by a prompt to
restart the computer.
10 Remove TokenDisk diskette #2 from the
floppy drive.
11 Click Yes to restart the computer.
This concludes the procedure for installing the NDIS 4
driver for Windows NT 4.0.
Auto ring speed detection is automatically enabled when
you install the NDIS 4 driver for Windows NT. If you want
to disable auto ring speed detection, see
“Auto Ring
Speed Detection ” in Chapter 7 .
The DynamicAccess Class of Service feature is disabled
by default when you install the NDIS 4 driver for
Windows NT. To activate Class of Service, see
Chapter 7 ,
“Configuring DynamicAccess Class of Service .”