3Com 3C319 - Manual (Page 38)

4-6 C HAPTER 4: I NSTALLING A N ETWORK D RIVER FOR W INDOWS 95
14 Remove TokenDisk diskette #2 from the
floppy drive.
15 Click Yes to restart your PC to activate the driver.
This concludes the procedure for installing the NDIS 4
driver for retail Windows 95 without PnP support.
Auto ring speed detection is automatically enabled when
you install the NDIS 4 driver for Windows 95. If you want
to disable auto ring speed detection, see
“Auto Ring
Speed Detection ” in Chapter 7 .
The DynamicAccess Class of Service feature is disabled
by default when you install the NDIS 4 driver for
Windows 95. To activate Class of Service, see
Chapter 7 ,
“Configuring DynamicAccess Class of Service .”
Installing the NDIS 4 Driver for Windows 95 OSR2
Follow these steps to install the driver for Windows 95
OEM Service Release 2 (OSR2) version 950b. It is assumed
that you are already running Windows 95.
During installation, have the Windows 95 software
accessible on diskettes, CD, or hard drive in case the
installation utility requests files from the Windows 95
software library.
1 Install the 3C319 NIC and start the computer.
Windows 95 detects the new hardware. ISA Token Ring
Controller appears in the New Hardware Found dialog
notice. The Update Device Driver Wizard dialog
box appears.
2 Click Next.
3 Click Other Locations.
The Select Other Locations dialog box appears.
4 Insert TokenDisk diskette #2 in the floppy drive.
5 Type the following path and click OK:
a:\