3Com 3C319 - Manual (Page 54)

6-2 C HAPTER 6: I NSTALLING A N ETWORK D RIVER FOR W INDOWS NT
Before Installing the Driver
Before installing the driver, make sure that Windows NT
is installed and that the following procedures have
been completed:
■
The 3C319 NIC has been installed as described in
Chapter 2 .
■
Plug and Play (PnP) has been manually disabled
as described in
Chapter 5 , “Configuring the
NIC Manually .”
Windows NT versions 3.51 and 4.0 are not PnP-enabled.
■
The NIC has been manually configured as described
in
Chapter 5 , “Configuring the NIC Manually .”
If your network environment uses the TCP/IP
communications protocol, you must obtain from
your network administrator all the information you
will need to define an IP address during the
installation process.
Installing the NDIS 4 Driver for Windows NT
This section describes installing the 3C319 NIC NDIS 4
driver for the following Microsoft Windows NT versions:
■
Windows NT 3.51
■
Windows NT 4.0
Windows NT 3.51
Follow these steps to install the NDIS 4 driver for
Windows NT 3.51:
1 Insert TokenDisk diskette #2 in the floppy drive.
2 In the Main group, double-click the Control
Panel icon.
3 In the Control Panel group, double-click the
Network icon.
4 In the Network Settings dialog box, click
Add Adapter.