3Com 3C319 - Manual (Page 32)

3-4 C HAPTER 3: I NSTALLING N ET W ARE DOS C LIENTS A UTOMATICALLY
3 To accept the terms and conditions, type:
y
To view the full text of the license agreement, press [F1].
4 When the information screen appears, press [Enter]
to continue.
A status message appears, followed by a prompt for the
ring speed of your network.
5 Enter the ring speed and configuration mode and
press [Enter].
The default ring speed is 16 Mbps. The 3C319 NIC
operates at either 16 or 4 Mbps. The speed of the NIC
and the network must be the same. Ask your system
administrator for your network ring speed. See
Chapter 5 ,
“Configuring the NIC Manually ,” for details.
The configuration mode choices are 3Com or IBM mode.
The default configuration mode is 3Com mode. See
Chapter 5 , “Configuring the NIC Manually ,” for details.
A message states that the NIC’s configuration is complete.
6 Remove TokenDisk diskette #1 and press any key
to reboot your PC.
The login prompt for a NetWare server appears.
7 Log in to the NetWare server with your ID
and password.
Your PC is now configured as a NetWare DOS ODI client.
If you cannot connect to the NetWare server, see
Chapter 9 , “Troubleshooting NIC Installation .”