3Com 3C319 - Manual (Page 61)

Using Class of Service Advanced Options 7-5
For example, if only TCP/IP is installed, do not enter
the socket range for IPX, as it will adversely affect
driver performance.
5 Once the Range Start, Range End, and Protocol are
entered press Add.
The range is added to the list, as shown in Figure 7-3 .
c
Figure 7-3 Class of Service Additional Ranges Screen with
Added Ranges
6 Click OK when you are finished.
To remove a range, select the range in the list and
click Remove.
Using Class of Service Advanced Options
You can use Class of Service Advanced Options to
adjust the network driver’s handling of certain types of
Class of Service traffic. In general, you do not need to
change these values. Contact your network administrator
before using these options.