3Com 3C319 - Manual (Page 47)

Configuration Options 5-7
■
I/O Base Address
■
BIOS/MMIO Address Location
■
Shared RAM Page Size and Address Range
■
Interrupt Request Level
■
Memory Mode
■
I/O Mode
■
IRQ Driver Type
■
AutoSwitch
■
Boot PROM
■
Zero Wait State
Plug and Play (PnP)
This option enables a PC with Plug and Play (PnP) support
to allocate resources for the 3C319 NIC. The resources
allocated in a PnP system include:
■
I/O base address
■
Interrupt request level
■
BIOS/MMIO base address
■
Shared RAM base address
The default for PnP is enabled. Disable PnP to configure
the 3C319 NIC with the Configuration and Diagnostic
Program. For instructions, see the section
“Changing
Configuration Option Settings ” earlier in this chapter.
Configuration Mode
This 3C319 NIC provides the following two modes
of operation:
■
3Com mode
■
IBM mode