3Com Network Video Server FlexWATCH 3110 - Manual (Page 56)

Network Video Server User’s Manual
Seyeon Tech Co., Ltd 56
Server can establish the Internet connection through PSTN line and send FTP or e-mail
when the alarm condition is triggered by any event.
Following can be done through Dial-out function
• Pre/post alarm image sending through e-mail
• Pre/post alarm image sending to FTP server through FTP function
• Establish connection with AOIP server :
when the event is happened, server can send e-mail notification for the alarm and can
keep the connection with AOIP server, not terminating the connection with ISP.
Thus, you can quickly connect the server through AOIP server and view live video. The
key benefit of using AOIP connection is to view live video without making a separate call
to FlexWATCH
TM server whenever there is alarm and you can easily access the server. If
you are running FW-Manager software, live video will be automatically display on the FW-
manager screen when there is any alarm.
4.3 Dial Out configuration
This is to set up the system to make a call to ISP when the dial out condition is activated
to transmit live video or send e-mail or FTP image.
4.3.1 Dial-up through Standard modem
Dial-out through standard PSTN modem is quite common and general.
1) Connect the server to PSTN line through RS-232 cable. Connect the cable to COM Port
or server. Use the standard D-Sub 9pin connector provided by PSTN modem.
2) Go to [WAN (PPP, Modem, etc)] menu in the Network configuration mode
3) Select “PPP client” option and fill out the option field.
- INTPLUS [2005] -