3Com Network Video Server FlexWATCH 3110 - Manual (Page 77)

Network Video Server User’s Manual
Seyeon Tech Co., Ltd 77
3) Check the output port number and click apply button to activate the alarm output
device
4.2.2 Alarm output device through Admin Page
Alarm output device can manually be controlled through Admin page of the system.
This option is recommended when web browser based alarm output control panel is hided
and administrator want to manually control Alarm output device.
1) Run Admin configuration panel
2) Click Alarm output control option in the Service configuration mode
3) Check the alarm output port and click “Apply” button
4.3
Automatic Control of Alarm Output device
Alarm Output device can automatically be controlled by setting up control condition
properly. This is to automatically to activate alarm output or any relay output device
connected to the server.
Up to three different conditions per alarm output port with schedule, Sensor or its
- INTPLUS [2005] -