3Com Network Video Server FlexWATCH 3110 - Manual (Page 60)

Network Video Server User’s Manual
Seyeon Tech Co., Ltd 60
LAN : This is default path the send any data to outside.
Modem : when PSTN or other medium than LAN is used to send data to outside. This
service port must be checked when any data is to be sent through PSTN or other medium
than LAN which is connected to COM port.
)
Note
Service path must be set up and checked before starting WAN configuration to send any
data through external PSTN modem connection or equivalent
If LAN is to be used, select “None(LAN)” option.
6 AOIP Setup
AOIP (Always-On-IP) is an IP gateway through which user can access the FlexWATCH™
server when it is connected to Dynamic IP address. Thus, if the server should be
connected to the Dynamic IP network and you want to view live video from anywhere, it
is the right solution for you.
6.1 How to use AOIP service
Following is a step you need to take to use AOIP service
-
Contact your local vendor or [email protected] to get user account for
AOIP service.
-
Register product in the AOIP server under your account
-
Set up your network (Port mapping function of your router)
-
Enable AOIP service option in the FlexWATCH™ server.
- INTPLUS [2005] -