3Com Network Video Server FlexWATCH 3110 - Manual (Page 96)

Network Video Server User’s Manual
Seyeon Tech Co., Ltd 96
4) Enable the Alarm buffering service.
5) Select the camera and assign Pre/post alarm image frames.
6) Click “Save” button to memorize your new setting in the system.
7) Click the Condition menu and set up alarm buffering service condition.
8) Click “Advance Service” menu in the Admin window and click “Stop and Apply”
button to start record alarm triggered image in the system memory.
)
Note that “Stop & Apply” button in the Advance Service window must be
refreshed by clicking the button to start recording of any video in the
memory. Otherwise no pre/post alarm image can be stored.
5.2 Playback of Pre/post alarm Image
Once Alarm buffering service configuration is correctly done and pre/post alarm image is
stored, any stored Pre/post alarm image can remotely playback through admin window.
1) Click Alarm Buffering Service menu from the Advance Service configuration menu
- INTPLUS [2005] -