3Com Network Video Server FlexWATCH 3110 - Manual (Page 78)

Network Video Server User’s Manual
Seyeon Tech Co., Ltd 78
combination is provided so as to set up powerful and various working condition for each
alarm output device.
1) Go to Advance service option in the Service configuration mode in the Admin window.
2) Click None buffering service menu and select “Alarm output” menu.
3) Check the service “Enable” option and select output port
4) Select Alarm Duration time from the drop down menu.
Note Alarm Duration time is to set up Alarm active time when alarm output device is
activated by any condition.
5) Go to Condition mode and set up condition to activate Alarm output device.
- INTPLUS [2005] -