3Com Network Video Server FlexWATCH 3110 - Manual (Page 84)

Network Video Server User’s Manual
Seyeon Tech Co., Ltd 84
2) Go to Buffering service mode
3) Click “Buffer Calculator” button to run the calculator
4) Pre configure pre/post alarm buffer for each service. This previous window can be
open till you manually disclose the Window. Thus, you can refer to this table when you
configure e-mail, ftp or Alarm buffering service configuration.
2
Service Condition
Sophisticated advanced services can be done by lots of serviced conditions provides by
the system. To correctly set up the system use must has good understanding about the
service condition as well.
e-mail, FTP, Sensor notification and Alarm output device control function requires service
condition set up to activate the function. Note that the basic logic for the service
condition set up is same for all of other options.
- INTPLUS [2005] -