3Com Wireless LAN Controller WX2200 - Manual (Page 114)

114 C HAPTER 5: U SING RF A UTO -T UNING WITH M ODELLING
12 To change the default WX switch model, select the model from the WX
Model list.
13 To change the default MAP model, select the model from the Default AP
Model list.
14 To change the MAP connection type, select the type from the AP
Connection Type list:
„
Direct—MAPs are directly attached to dedicated WX switch ports.
„
Distributed—MAPs can be indirectly attached through intermediate
Layer 2 or Layer 3 devices.
„
Distributed (Auto)—MAPs can be indirectly attached through
intermediate Layer 2 or Layer 3 devices. They receive their
configuration automatically using a profile that assigns a Distributed
MAP number and name to the MAP from among the unused valid
MAP numbers available on the switch.
15 Click Next. If you selected Direct or Distributed in the AP Connection
Type list, the Redundant Connections page appears; go to step 16. If you
selected Distributed (Auto) in the AP Connection Type list, the Capacity
Planning for Data page appears; go to step 20.
16 To plan for redundant MAP connections to WX switches, select
Compute Redundancy.