3Com Wireless LAN Controller WX2200 - Manual (Page 151)

Generate a Work Order 151
If the coverage area provided by a MAP on the floor above or below is
one meter or less, 3WXM displays a message. This coverage area is not
displayed on the floor plan.
Generate a Work
Order You can generate a work order as part of your wireless network
planning. The work order provides all of the necessary information for the
physical installation of the 3Com Mobility System. A work order shows
where the MAPs should be installed, WX initial setup configuration
information, and projected RSSI information that is useful when verifying
the installation.
To generate a work order
1 Display the floor plan in the Content panel.
2 In the Task List panel, click RF Planning.
3 Under RF Planning, click Work Order Report. The Work Order
Generation dialog is displayed.