3Com Wireless LAN Controller WX2200 - Manual (Page 67)

Configure Employee Access Services 67
4 In the Task List panel, select VLAN.
The Create VLAN wizard is displayed.
5 Enter vlan-mkt as the VLAN name and use the VLAN ID suggested by the
wizard.
6 Click Next. Select the ports you want to use in the VLAN and click Add
or Move.
„
The Add button adds the ports to the new VLAN without removing
them from any other VLANs.
„
The Move button removes the ports from all other VLANs, and places
them in the new VLAN.
The ports appear in the Current Members list.
To tag ports in the VLAN, select Tag and edit the tag value. (Tagging is
required if you click Add, because the ports are then members of
multiple VLANs.)
7 Click Next. (Optional) To assign an IP interface to the VLAN, edit the IP
address or select DHCP Client. To enable the IP interface, select Interface
Enabled.
8 Click Finish.
The new VLAN appears in the Content panel.