3Com Wireless LAN Controller WX2200 - Manual (Page 143)

Plan RF Coverage 143
28 In the Active Handsets per AP list, specify the number of voice over IP
phones that you want each MAP to handle.
29 In the Expected Handset Count list, specify the number of voice over IP
phones you expect to be in the coverage area.
30 In the Handset Oversubscription Ratio list, select the ratio for the average
transmit behavior of the voice over IP phones.
The handset oversubscription ratio is the ratio of active handsets
compared to total handsets. For example, the ratio 4:1 indicates that,
statistically, 25 percent of the voice over IP phones are active at any given
time.
31 Click Next. The Mobility Domain, Radio Profile, Wiring Closet(s) page
appears.
32 In the Mobility Domain list, select the Mobility Domain that contains the
MAPs used for this coverage area.
33 In the Radio Profile list, select the radio profile used for this coverage area.
The profiles available depend on the Mobility Domain you selected in
step 32. The profile you select applies to all radios associated with the
coverage area. If you type the name of a radio profile that does not
already exist, 3WXM creates it.