3Com Wireless LAN Controller WX2200 - Manual (Page 124)

124 C HAPTER 6: U SING RF P LANNING
2 In the 3WXM Services Connection dialog box, enter the IP address of a
host running 3WXM Services, optionally enter a user name and
password, and click Next.
If the 3WXM Service is installed on the same machine as the one you are
using to run 3WXM, enter 127.0.0.1 as the IP address. This is a standard
IP loopback address.
3 After a connection is established to the specified 3WXM Services host,
select File > New Network Plan. The Create Network Plan wizard
appears.
4 In the Network Plan Name box, type a name for the network plan. You
can use 1 to 60 alphanumeric characters, with no spaces, tabs, or any of
the following: slash (/), backslash (\), quotation marks (“ ”), asterisk (*),
question mark (?), angle brackets (< >), or vertical bar (|).
5 In the Country Code list, select the country where the network is to be
deployed.
You must select a country code before continuing.
6 Click Next to save the network plan on the server and open it in 3WXM.