3Com Wireless LAN Controller WX2200 - Manual (Page 188)

188 C HAPTER 8: O PTIMIZING A N ETWORK P LAN
„
The Total number of RF measurements that did not intersect any
object line lists the number of measurements that did not experience
attenuation due to an RF obstacle in the path between them.
If the measurements came from a site survey file, they are
measurements between the deployed MAPs and the Ekahau Site
Survey tool performing the survey. If the measurements came from
MAP radios in the network, they are measurements between MAP
radios.
„
The Total number of objects that will be corrected line indicates the
number of measurements that did experience attenuation. For
existing RF objects, 3WXM corrects the attenuation to match the
results. If the floor plan does not have an RF obstacle where the
attenuation library indicates one exists, 3WXM creates an RF obstacle.
For RF obstacles created by 3WXM, the description is
auto-generated and the obstacle type is Other. You can edit these
values by selecting the obstacle, clicking the Edit properties icon to
open the Modify RF Obstacle wizard, and modifying the values. Click
Finish to close the wizard and save the changes.
4 Click Finish.
You have optimized your RF coverage model with the new RF obstacle
information. Now you can locate and fix coverage holes, or if necessary,
replan your network.