3Com Wireless LAN Controller WX2200 - Manual (Page 185)

Using RF Measurements from an Ekahau Site Survey 185
Importing RF
Measurements from
the Ekahau Site
Survey
After you complete the site survey, you import the csv file containing the
RF measurements from the Ekahau Site Survey tool into your network
plan. After you import your RF measurements, you optimize to correct
attenuation for obstacles on the floor.
To import RF measurements
1 Display the floor plan in the Content panel.
2 In the Task List panel, click RF Planning.
3 Under Site Survey, click Import Measurement. The Import RF
Measurements wizard is displayed.
4 Select File as the source of the measurements (or, you can select both
Network and File).
5 Select Ekahau from the File Format listbox.
6 Click Choose to navigate to the csv file that contains the RF
measurement data.
7 In the Map Name field, verify the map name.
The map name in the RF Neighborhood Source window must match the
map name in the top line of the .csv file from the Ekahau Site Survey tool.