3Com Wireless LAN Controller WX2200 - Manual (Page 52)

52 C HAPTER 3: C ONFIGURING W IRELESS S ERVICES
Configure
Employee Access
Services Services for Employee access are typically configured to provide secure,
encrypted access to the wireless network.
The following sections provide information about how to configure
Employee access:
„
“Task Table” on page 52
„
“Step Summary” on page 54
„
“Example: Configure Employee Access” on page 55
Table 9 on page 52 contains the tasks you need to perform to configure
Employee access services. The summary provides the configurable options
you should set. The section “Example: Configure Employee Access” on
page 55 guides you through the primary wizards and pages in 3WXM to
configure Employee access services.
Task Table Table 9 contains the tasks you need to perform to create a service for
employee access. For a summary of configurable items, see “Step
Summary” on page 54. For detailed steps about how to perform each of
these tasks, see “Example: Configure Employee Access” on page 55.
Table 9 Creating a Service for Employee Access
Task Path
Primary Parameters to
Configure
“Create a
Radio Profile”
on page 56 1 Tool bar option: select
Configuration.
2 Organizer panel: expand
the WX switch.
3 Expand Wireless.
4 Click on Radio Profiles.
5 Select Radio Profile in the
task list.
From the Create Radio Profile
wizard:
„
Radio profile name: enter a
name
After you create the service profile,
you can map it to the radio profile.
After you install the MAPs, you can
map their radios to the radio
profile.
Note: The examples in this chapter
configure the radio profile first.
However, you also can configure
the radio profile later as part of
service profile configuration.