3Com Wireless LAN Controller WX2200 - Manual (Page 126)

126 C HAPTER 6: U SING RF P LANNING
To create a building
1 In the Organizer panel, click the site name.
2 Select Create Building in the Task List panel. The Create Building wizard
prompts you for information about the new building.
3 In the Building Name box, type the name of the building (1 to 30
alphanumeric characters, with no spaces or tabs), and click Next.
4 In the Number Of Floors box, specify how many floors the building has.
When you specify the number of floors a building contains, 3WXM
creates each floor using the default settings. You can edit the floors
3WXM creates or you can add new floors.
5 In the Starting Floor Level box, specify the floor number of the first floor
in the building. To start with a subterranean floor, you can specify 0 or a
negative floor number.
6 In the Skip Floor Levels box, specify floor numbers you want to skip.
Skipping floors is useful when you want to model only certain floors in a
building. To enter a list of floors, use commas to separate the floor
numbers (example: 1,3,7). To enter a range, use a hyphen (example:
8-12).
7 Click Finish to close the wizard.