3Com 1100 - Manual (Page 110)

110 C HAPTER 4: W ORKING W ITH THE C OMMAND L INE I NTERFACE
Adding a Statically
Configured Address
to a Switch Database
You can add a statically configured address to a switch database using
the
add command on the Address menu.
To add an address to a port:
1 At the Top-level menu, enter:
bridge port address add
The following prompt is displayed:
Select bridge port(1-12):
2 Enter the number of the port that you wish to add an address to.
The following prompt is displayed:
Enter the address to be added:
3 Enter the address, which must be entered in the form of hyphen
separated bytes, for example: 08-00-02-06-03-bd.
The following prompt is displayed:
Enter the VLAN ID for this address (1-4094) [1]:
4 Enter the VLAN ID for the newly assigned address.
Finding a MAC
Address
You can find a MAC address within the address databases on all Switch
units within the stack using the
find command on the Address menu.
To find a port MAC address:
1 At the Top-level menu, enter:
bridge port address find
The following prompt is displayed:
Enter the address:
2 Enter the address that you wish to find. The address must be entered in
the form of hyphen separated bytes, for example: 08-00-02-06-03-bd.
The command produces a display that shows all occurrences of the
address within the stack forwarding database and indicates the unit and
port number associated with it.