3Com 1100 - Manual (Page 94)

94 C HAPTER 3: W ORKING W ITH THE W EB I NTERFACE
To display the Packet Size Distribution graph:
1 From the first listbox, choose a port.
2 From the second listbox, choose Packet Size Distribution.
3 Click Apply.
Interpreting the Statistics
■
The Utilization graph scales automatically to display the percentage of
bandwidth used on the port over the last hour and last 48 hours:
■
A bandwidth utilization of 0–25% indicates that the port is dealing
with a light traffic load.
■
A bandwidth utilization of 26–85% indicates that the port is
dealing with a normal traffic load.
■
A bandwidth utilization of 86–100% indicates that the port is
dealing with a heavy traffic load. This could be caused by a fault in
your network, or an inadequate network configuration.
■
The Total Errors graph scales automatically to display the total number
of packets with errors that have been seen on the port over the last
hour and last 48 hours.
■
The Packet Size Distribution graph displays the proportion of packets
of certain sizes seen by the port over the last 30 seconds.